Evolabel FlexWipe palleapplikator er en sikker, kompakt, hurtig og brugervenlig løsning til hårde industrielle miljøer.
FlexWipe frigiver fleksibilitet på grund af enhedens kompakte størrelse, ligesom den samme applikator kan etikettere alle tre sider mod systemet.
Applikatoren er bygget på to servostyrede roterende bevægelser. Den indre monocoque arm kan rotere 360º, og etiketterne kan printes i to retninger. Den ydre arm, der holder applikatorpuden, kan rotere 200º.
En kamerabaseret scanner er placeret bag applikatorpuden. Når der kræves validering ved kontrolscanning, bevæger armene sig og roterer 180º til en optimal scanningsposition, hvor alle trykte stregkoder kontrolleres.
Eksempel på label prosition (symmetrisk). Her med en minimum anbefalet afstand på 50 mm mellem applikatoren og pallen, hvilket placerer etiketten 237 mm fra pallehjørnet.
Suitable printer models: T63 G2
Minimum label size: 80×80 mm
Maximum label size (WxL): 178×240 mm
Label height position: (top of label: Standard 770 +/- 400 mm. (Optional 1270 +/- 400 mm).
Label position (symmetric) at min distance (50 mm) between applicator and pallet : 237 mm from pallet corner to near edge of A5 label
Minimum separation between pallets: 750 mm
Label position (assymetric) at smallest possible separation between pallets (450 mm):
Front/Back label: 50 mm from pallet corner to near edge of A5 label
Side label: 343 mm from pallet corner to near edge of A5 label
Distance between applicator and pallet: 215 mm
Air supply: 6 bar, clean and dry
Capacity (2-side labeling): Exceeds 5 pallets/min
Dimensions (WxDxH): 916x610x2047 mm
Weight ( applicator): 9 kg
Weight (T63 printer+applicator): 38 kg
Weight (FlexWipe,T63 + stand): 82 kg
Models: One model for any side
Operating temperature: +5°C to +40°C (down to -28°C provided that the power is always switched on)
Humidity: 20 to 85%, non-condensing
Pivotable Machine Mount Principle
The pivotable machine mount takes away crushing hazards between the moving pallet and the pallet applicator. If a person gets between the moving pallet and the applicator (pos Y1) the applicator will rotate from its operation position X1 towards X2 and further.
This will leave room for the person between the pallet and the system (pos Y2). The system will also detect and alarm so the production line can be stopped. The pivotable machine mount can turn 90 deg counter clock wise and 180 deg clock wise.
