Print technology: Direct thermal

Maximum print width: 108 mm

Maximum print length: 350 mm

Label size (W x L): 30×20 mm to 118×400 mm (applicator specific)

Maximum media width: 120 mm

Printable area: 100% thanks to automatic rewind of each label

Applicators: Blow, BlowVAC, Belt, Tamp, eTamp, Wipe G2, Wipe90 G2, QuickTamp

Resolution: 300 dpi

Print speed: Printing speed Default 160 mm/s (standard max. speed 200 mm/s, optional max. speed 300 mm/s)

Historically compensated print function: Built into the control unit

Heat compensated print function: Built into the control unit

Fonts: Truetype, Unicode

Barcodes: EAN-13, EAN-8, CODE128, GS1-128, GS1-Databar (+ Exp, Limit, Stack, Stack Omni, Exp Stack), Interleaved 2 of 5, UPCA

2D codes: Datamatrix, PDF-417, QR code

External dimensions, excl. applicator (LxWxH): 440x360x425 mm

Label roll outer diameter (max): 12″ / 300 mm

Label roll core diameter: 3″ / 76 mm

Label roll winding: Labels on the outside of the roll

Communication: Ethernet/LAN, USB, CANopen, RS-232

Operating temperature: +5°C to +40°C

Humidity: 20 to 85%, non-condensing

Mains supply: 110/240 VAC, 50/60 Hz

Air supply: 6-10 bar, clean and dry

Tilbehør

1. Touch screen

From the 10.4” touch screen the operator can easily change products and settings.

2. Status beacon

The status tower provides an easy way to monitor the machine status from a distance.

3. Control Panel

From the Control panel the operator can easily stop, reset and start the printer.

4. Trigger sensor

Evolabel offers a reflecting PNP trigger sensor from SICK, which fits most applications. The machine can interface to any 24V PNP trigger from other suppliers.

5. Mounting kit

This is the standard robust stainless steel mounting kit from Evolabel. It will fit most applications. It is intended to be used with the pillar stand (6).

6. Pillar stand

This pillar stand of anodized aluminium can either be mounted directly on the floor or onto the stand foot (7). The pillar stand is also available with motorized height adjustment.

7. Stand foot

The stand foot is a robust powder coated aluminium foot with wheels and adjustable machine feet covered with rubber for good positional stability.